Combi Hammer Drill
Triton 20V Combi Hammer Drill Triton T20 100901
Combi hammer drill with keyless 13mm single sleeve chuck, 16 torque settings, drill and hammer drill modes, variable velocity and reverse. Long-life excessive efficiency motor. LED work gentle and durable steel belt clip. Includes 2 x 4.0Ah Li-ion batteries and clever 1hr charger. No load velocity Zero-450 rpm low gear, Zero-1600 rpm excessive gear, with 60Nm max torque. Impact charge 7200 ipm low gear; 25,600ipm excessive gear. Weight 1.9kg (together with fourAh battery). Length 230mm.
|Battery Type||fourAh Li-ion|
|Charger||HP-230-5H / 1 hour|
|Drilling Capacity – Maximum in Masonry||10mm|
|Drilling Capacity – Maximum in Steel||8mm|
|Drilling Capacity – Maximum in Wood||24mm|
|No Load Speed||Zero – 450 / Zero – 1,600rpm|
From the producer
- Voltage: 20V
- No load velocity: Zero-450 / Zero-1600rpm
- Weight: 1.9kg (with 4.0Ah battery pack)
- Maximum torque: 60Nm
- Impact frequency: 7200 / 25600ipm
Triton T20CH 20V Combi Hammer Drill
The compact T20 Combi Hammer Drill incorporates a Mabuchi RS-735 motor with 2-speed gear field, driving speeds of 1600 rpm, and a hammer motion mode delivering as much as 25,600 impacts per minute for a strong, managed efficiency in any scenario.
Featuring a single-sleeve keyless chuck for quick bit adjustments, the T20CH boasts sintered, all-metal gearing and digital brake for environment friendly energy transmission and lengthy life.
Equipped with a 16+2-stage torque adjustment for quite a lot of supplies and screw sizes, the T20CH additionally incorporates an LED work gentle to light up the work floor, and for enhanced consolation and management, the ergonomic grip helps scale back fatigue throughout extended, repetitive work.
Supplied with 2 x four Ah Samsung Li-Ion batteries and clever charger, the T20CH is ideal for steady drilling, hammer drilling and driving functions in all supplies, together with masonry. The keyless 13 mm / half inch Sanou chuck is appropriate with all commonly-used drill bits and equipment, permitting you to get to work on just about any drilling process that’s thrown at you.
Powerful Mabuchi RS-735 motor delivers ample energy and pressure for essentially the most demanding driving and fastening functions in any materials.
High-torque design with 16+2 settings and all-metal gearing for efficient, managed drilling and affect motion efficiency.
2-speed motor with reverse and variable velocity for managed software.
2 x four Ah high-capacity lithium-ion batteries and charger allow steady operation and remove downtime.
Keyless single sleeve 13 mm (half inch) Sanou chuck for fast and straightforward becoming of drill bits and equipment.
Ergonomic, rubber-overmoulded, vibration-reducing grips for max operator consolation.
LED work gentle for optimum illumination of the work space, and durable steel belt clip for fast storage when each palms are required.
Convenient tender carry case for straightforward transport and protected storage.
Keyless single sleeve 13 mm / half inch Sanou chuck
16+2 torque settings and hammer mode
Compact and light-weight design
- 2 x 4.0Ah lithium-ion batteries
- Intelligent charger
- Soft bag
Product EAN 5024763111082
***Do you need to know extra about this product? Click right here to learn the detailed person directions.